Holder’s Helpers – Heat Illness: Symptoms and Prevention

As summer approaches and the days get longer, the dangers of working outside during hot weather also increases. Knowing how to work safely in hot weather can help prevent heat stress injuries and heat stroke.  According to the National Institute for Occupational Safety and Health (NIOSH), heat stroke is the most serious heat-related disorder and occurs when the body can no longer control its temperature. The body temperature can rise to 106 degrees Fahrenheit or higher within 10 to 15 minutes and heat stroke can cause death or permanent disability if emergency treatment is not provided.  Other heat-related disorders include heat exhaustion, heat cramps and heat rash.

Heat Illness: Symptoms and Prevention

Heat-Related Disorders

Heat stroke occurs when the body no longer sweats and body temperature reaches dangerous levels. Symptoms of heat stroke include:

  • Dry, hot reddish skin and lack of sweating
  • High body temperature
  • Strong, rapid pulse
  • Chills
  • Confusion
  • Slurred speech

Heat exhaustion is the body’s response to the loss of water and salt, typically through sweating. Symptoms of heat exhaustion include:

  • Excessive sweating
  • Weakness or fatigue
  • Dizziness and/or confusion
  • Clammy skin
  • Muscle cramps
  • Flushed complexion

Heat cramps are painful cramps in the body’s muscles due to low salt levels and are typically caused by excessive sweating.  Symptoms of heat cramps include:

  • Muscle pain usually in the abdomen, arm or legs.
  • Muscle spasms usually in the abdomen, arm or legs.

Heat Rash is an irritation of the skin caused by excessive sweating.  Symptoms of heat rash include:

  • Red cluster of pimples or small blisters
  • Usually on neck and upper chest, groin area, under the breasts, and in elbow creases.

Ten Hot Weather Safety Tips:

  1. Stay hydrated. Drink plenty of fluids; drink about 16 ounces before starting and 5 to 7 ounces every 15 or 20 minutes.
  2. Avoid dehydrating liquids. Alcohol, coffee, tea and caffeinated soft drinks can hurt more than help.
  3. Wear protective clothing. Lightweight, light-colored and loose-fitting clothing helps protect against heat. Change clothing if it gets completely saturated.
  4. Pace yourself. Slow down and work at an even pace. Know your own limits and ability to work safely in heat.
  5. Schedule frequent breaks. Take time for rest periods and water breaks in a shaded or air conditioned area.
  6. Use a damp rag. Wipe your face or put it around your neck.
  7. Avoid getting sunburn. Use sunscreen and wear a hat if working outside.
  8. Be alert to signs of heat-related illness. Know what to look for and check on other workers that might be at high risk.
  9. Avoid direct sun. Find shade or block out the sun if possible.
  10. Eat smaller meals. Eat fruits high in fiber and natural juice. Avoid high protein foods.

 

Should You Delay Getting Your Air Conditioner Replaced?

If you’re asking how long you’ll be able to delay programming a replacement or air conditioning repair you must, in all probability, raise some further queries.

Late summers in many American states are often warm and humid. An AC in ill health will cause you to deal with a busted AC as you anticipate a replacement for your system. Consider contacting air conditioning repair. Our team of air conditioner services can work deligently on a failing system as soon as possible.

Is the Air Conditioning Showing Signs that it’s Failing?

Suppose you’re thinking that the AC is in bad shape because it’s taking longer to cool down the house. If the house isn’t getting cool enough, the air conditioning is creating strange noises, or it’s turning on and off at weird times, don’t worry about a replacement at once. First, consider whether or not the system wants repairs. 

We offer the best air conditioning repair in Tehachapi.

Is the Air Conditioning Recent? However, is it Still Running Fine?

The average service life of air conditioning is between ten to fifteen years. If your air conditioning is over fifteen years recent and still operating adequately, we propose that you have the system replaced throughout the autumn. It’s sufficiently old that it’ll shortly begin to lose potency and rack up repairs. However, you’ll be able to wait till cooler weather in an exceedingly few months; therefore, you’ll be able to organise a convenient repair. If the air conditioning is older than ten years and you consider paying additional to run it, you must also contemplate a fall replacement.

Is the AC Associate Degree Older R-22 Air Conditioner?

The refrigerant mix R-22 was phased out this year, making it troublesome to have these systems repaired in case of refrigerant leaks. Suppose you have an associate degree in R-22 air conditioning (it’s listed on the plate on the rear of the condenser unit). In that case, we tend to powerfully advocate you have got it replaced shortly, in all probability throughout the autumn. 

If you have doubts about a few replacements, don’t wait to decide on the United States of America for a consultation. We will provide you with honest, easy answers concerning the trail forward. We also provide air conditioning service in Shafter, CA, call us or book your appointment for a consultation. Contact us now!

Reasons Why You Should Change Your HVAC Air Filter

Air filters play an essential part in an HVAC system. They have a significant role in an air conditioner, heater, or heat pump in maintaining the temperature of your place. The air filters are also crucial in maintaining the indoor air quality of your home by preventing the entry of allergens, dust, and pollen inside your home. The maintenance of the air filters is also necessary to protect your indoor HVAC unit from dust, debris, and dirt. 

The air filters show the tendency to attract and accumulate dust from the environment. A dirty air filter will affect the working efficiency of your HVAC system and increase the entry of allergens inside your home. Therefore, planning the routine HVAC repair in Bakersfield is mandatory to maintain the efficiency of your HVAC unit as well as protect your health. 

Ordinary Reasons Why you Should Change your Air Filter

A Dirty Air Filter will Damage the HVAC Unit

An air filter protects your indoor heating or cooling units from dust and debris in the air. In the case of an air conditioner, the system absorbs the heat from your home and throws it outside. A dirty air filter will certainly obstruct the flow of warm air and cause the freezing of the coil. Thus, your AC will not be able

 to remove the heat from your home efficiently. 

Similarly, the dirty air filter in a furnace obstructs the flow of warm heat. As a result, it will cause the overheating of the unit. Schedule an HVAC repair in Bakersfield to prevent your HVAC unit from overheating. 

Increase your Utility Bills

 

A dirty air filter will affect the performance of your HVAC system by decreasing its performance. Gradually it will raise the load on the system while running. In addition, the overloaded HVAC unit will consume excessive energy, which will increase the utility bills. It would help if you cleaned or changed the air filter every 30 to 90 days to avoid this. Call the professional for HVAC Service in Bakersfield, and ask about the best air filters for your HVAC unit. 

Decrease your Comfort

A clogged air filter will disturb the air circulation through the vents. Due to this, your HVAC system will not be able to cool or heat your home sufficiently. Thus, it will be highly uncomfortable if your HVAC system is not providing the desired temperature. 

Also, a dirty air filter will affect the air quality of your home. It will increase the chances of having respiratory tract infections in the family. Therefore, you should plan the replacement air filter and HVAC Service in Bakersfield, to enjoy a comfortable temperature. 

If your HVAC system is not maintaining the appropriate temperature of your place, call Holders Air Conditioning & Heating Inc. We will be at your place immediately, soon after receiving your call from the client. 

Online Bookings and Others 

You can book an HVAC service by emailing us at support@holdersac.com or directly by clicking on our website’s ‘Contact Us’ button. For any doubts, dial (661) 864-1925.

Signs You Need a Furnace Replacement

Your furnace is your home’s most vital system, as well as one of the most expensive appliances to replace. As a result, homeowners may worry about how long they can expect their furnace to last. We’ll go over how long a furnace typically lasts, how to tell when it’s time to replace it, and a few things you can do to help your furnace last longer.

  • Furnace getting old

A furnace’s usual lifespan is between 15 and 30 years. If your furnace is less than 15 years old, it is unlikely that you will need to replace it. However, if it’s older than that and you’ve begun to notice issues, it could be on its last legs. 

Keep in mind that the life of your furnace is determined by several things, including the sort of furnace you have, how frequently you use it, how properly it was installed, and whether you maintain it regularly.

  • Rising heating bill 

As winter approaches, keep an eye on your monthly energy expenditures. If you’re paying a lot more than last year—and your rates haven’t gone up—it’s possible that your furnace needs repair. A well-maintained appliance is more likely to operate at peak efficiency. 

Repair may be possible to improve efficiency depending on the circumstances. The increased running expenses may be sufficient to justify the installation of a new unit. Because your furnace is old and in need of replacement, it may be working harder to heat your home.

  • A lot of repairs

Have you recently had to make repairs to your furnace? Old furnaces require frequent maintenance in the last two years of their lives. Consider these repairs pleas for aid from a broken furnace in desperate need of replacement! To save money on repair, call a professional like mini-split HVAC services Tehachapi CA.

  • House is not getting warm enough.

Despite having the heat turned on, feeling cold indoors is likely the most apparent reason to inspect your furnace. Newly created air leaks or a faulty or malfunctioning thermostat may make it feel colder. However, in the lack of other explanations, residents are advised not to overwork the heating system. Instead, hire an expert like ductless HVAC services Shafter CA, especially if the temperatures in different rooms are drastically varied.

  • Strange noises

When an old furnace is on its last legs, it makes strange noises. Another thing you could notice is that your blower is turning on more frequently or running for more extended periods since it needs to work harder. It’s possible that your furnace has to be replaced.

  • Emission of carbon monoxide

Older furnaces are more prone to heat exchanger cracks, leading to carbon monoxide gas leaks. As you are undoubtedly aware, this is quite dangerous for you and your family. Get out of the house and contact a heating contractor such as ductless HVAC services Shafter CA to inquire about a new furnace!

  • Furnace looks old

You may notice the rust and other signs of wear and tear on an old furnace in addition to cracks. Rust and gaps can reduce your furnace’s performance and lead to tragedies in the future.

If you are looking for mini-split HVAC services in Tehachapi, CA, then Holders Air Conditioning & Heating can help you provide budget-friendly and trustworthy services. Call us at 6618641925 or drop us a mail here.

 

8 Signs Your Furnace Needs Help

Longer evenings and frigid weather will soon replace the hot, sunny days. Therefore, you must ensure that your furnace is prepared for the upcoming season. However, you may be surprised to realize that it is not operating at all, forcing you to contact the furnace installation company. 

Not calling for an HVAC repair in Bakersfield when you need one could be your most significant error this fall, as you may face setbacks such as excessive energy expenses and poor indoor air quality.

Cues that your Furnace Needs Help!

Your House is not Warm.

The inability of your home to stay warm is one of the most obvious symptoms that your furnace needs to be repaired. Your furnace’s entire function is to keep your house warm, so if it’s cold inside, your furnace isn’t doing its job effectively.

Insufficient Airflow.

Does it feel like the air is barely coming out of your vents when your furnace is on? Poor airflow is a significant issue for furnaces, and you should correct the source as soon as possible before it causes further issues with your system.

Deafening Noises.

It’s normal for your furnace to generate some noise while it’s running, but you should take note of any unusual or loud noises. If your furnace makes sounds like banging, popping, screaming, grinding, or booming while it’s running, it’s probably attempting to alert you that something is wrong.

Your System won’t Start.

One of the most dangerous events that might occur to the furnace is that it will not turn on at all. This could have been caused by an electrical shock or one of your system’s numerous safety features. Be sure to get in touch with Holders Air Conditioning & Heating for heating and cooling supply in Bakersfield as soon as possible so that you are not kept out in the cold for too long.

Produces an Odor.

Unless you’re operating the furnace for the first time this year, your equipment should not emit any unusual odors. However, if it does, you must contact Holders Air Conditioning & Heating as soon as possible. Furnace odors are frequently an indicator of not only operating faults but also potential dangers to your system.

The Accumulation of Water.

If you observe water accumulating on or around the furnace, there is likely a leak in the humidifier or condensate drain pipe. An expert should address these problems, such as Holders Air Conditioning & Heating.

Short Cycling.

Is your furnace turning off soon after starting a heating cycle or before the home reaches the right temperature? This is termed “short cycling,” a common indication that your furnace needs to be repaired.

High Electricity Bills.

Keep records of your regular electric bills. A consistent increase in your heating expenses is an indication that the furnace has developed an issue that needs to be repaired.

Contact Us

If you have any questions regarding these furnace repair warning signals or need an HVAC Repair Taft CA, contact Holders Air Conditioning & Heating to get Bakersfield’s heating and cooling supply.

 

Signs When Does My HVAC Need to be Repaired

If the air conditioner is not working correctly, it may be time for a checkup or professional assistance. For any AC repair work, you should always use a professional. Before the HVAC problem spirals out of control, you should know the warning signs.

Signs When Does My HVAC Need to be Repaired

Hot Air

Check that the thermostat is set to fridge mode and lower than your home’s current temperature. If the vent continues to blow heated air, the reason could be limited airflow or a compressor problem. If you prefer to leave HVAC maintenance and repairs to the professionals rather than handle it yourself, heating repair services are in Bakersfield.

Inadequate Airflow

A clogged air filter, a broken motor, or something more serious could be the source of the problem. If insufficient airflow is a frequent problem in your home, we recommend investing in an energy-recovery ventilator. It lets your air conditioner run more efficiently by exchanging stale air for fresh air every time the unit cycles.

Thermostat Issues

An air conditioner thermostat is a mechanism that controls the ac. It is used to turn on and off the air conditioner. If your air conditioner won’t switch on or only operates for a limited length of time, this suggests that the ac thermostat has failed. For this, you would need to contact a heating replacement in Bakersfield.

Noise Issues

If your air conditioner makes a peculiar noise, it may be an indication that it needs to be repaired or replaced. This noise suggests that something has gone wrong with the equipment. This noise may also signal that a metal component in your air conditioner requires further maintenance.

Periodic Cycle

Regardless of the weather, air conditioning units should go through reasonably consistent cooling cycles. Even if you anticipate the cooling system turning on more often during the warmest days of summer, it should not cycle on and off constantly. If you detect repeated cycles, contact heating replacement in Bakersfield.

Leaks of Water

Air conditioners use gas to cool the room and cause condensation while running. However, neither of these substances should collect or leak into the dwelling. An active leak surrounding your ac unit is a significant indicator that the cooling system isn’t working correctly. Don’t put off calling for heating repair in Bakersfield since leaks can quickly cause damage to your property and potentially lead to significant structural issues.

Increased Electricity Bill

If your electricity bill suddenly increases due to your AC system, this suggests that the AC system requires repair or replacement. Of course, there could be 1.000 reasons for this problem, maybe a leak in the AC ducting, a malfunctioning thermostat, or the age of the unit.

You may have realized why experts must handle the majority of the difficulties. However, when your HVAC system requires attention, the best thing you can do is contact Holders Air Conditioning & Heating, and we will ensure that your furnace is correctly cared for. You won’t be sorry because it can add a few years to the life of your heater as well as a few bucks to your wallet.

Reasons Why You Should Change Your HVAC Air Filter

Air filters play an essential part in an HVAC system. They have a significant role in an air conditioner, heater, or heat pump in maintaining the temperature of your place. The air filters are also crucial in maintaining the indoor air quality of your home by preventing the entry of allergens, dust, and pollen inside your home. The maintenance of the air filters is also necessary to protect your indoor HVAC unit from dust, debris, and dirt. 

The air filters show the tendency to attract and accumulate dust from the environment. A dirty air filter will affect the working efficiency of your HVAC system and increase the entry of allergens inside your home. Therefore, planning the routine HVAC repair in Bakersfield is mandatory to maintain the efficiency of your HVAC unit as well as protect your health. 

Ordinary Reasons Why you Should Change your Air Filter

A Dirty Air Filter will Damage the HVAC Unit

An air filter protects your indoor heating or cooling units from dust and debris in the air. In the case of an air conditioner, the system absorbs the heat from your home and throws it outside. A dirty air filter will certainly obstruct the flow of warm air and cause the freezing of the coil. Thus, your AC will not be able to remove the heat from your home efficiently. 

Similarly, the dirty air filter in a furnace obstructs the flow of warm heat. As a result, it will cause the overheating of the unit. Schedule an HVAC repair in Bakersfield to prevent your HVAC unit from overheating. 

Increase your Utility Bills

A dirty air filter will affect the performance of your HVAC system by decreasing its performance. Gradually it will raise the load on the system while running. In addition, the overloaded HVAC unit will consume excessive energy, which will increase the utility bills. It would help if you cleaned or changed the air filter every 30 to 90 days to avoid this. Call the professional for heating repair in Taft, CA, and ask about the best air filters for your HVAC unit. 

Decrease your Comfort

A clogged air filter will disturb the air circulation through the vents. Due to this, your HVAC system will not be able to cool or heat your home sufficiently. Thus, it will be highly uncomfortable if your HVAC system is not providing the desired temperature. 

Also, a dirty air filter will affect the air quality of your home. It will increase the chances of having respiratory tract infections in the family. Therefore, you should plan the replacement air filter and heating repair in Taft, CA, to enjoy a comfortable temperature. 

If your HVAC system is not maintaining the appropriate temperature of your place, call Holders Air Conditioning & Heating Inc. We will be at your place immediately, soon after receiving your call from the client. 

Online Bookings and Others 

You can book an HVAC service by emailing us at support@holdersac.com or directly by clicking on our website’s ‘Contact Us’ button. For any doubts, dial (661) 864-1925.

 

The Best Time of Year to Replace Your HVAC System

Sometimes, it’s easy to know when you should get a new HVAC system.

If it’s early August, your ancient AC won’t turn on, and the HVAC technician says the problem is an expensive part or an R-22 refrigerant leak, it’s probably time to replace your air conditioner.

To do otherwise would be like buying a new transmission for a 1996 Dodge Stratus. There’s just no use in throwing money at something that’s likely to break down again the next day.

But there are other times when the choice isn’t so cut and dry — like when your old system still works, but you feel like it’s about to start giving you problems.

Or when it already is causing problems.

Signs it’s time to replace a working HVAC system

Before we discuss the best time of year to replace your HVAC system, let’s consider why you might replace an air conditioner or furnace that still works:

  • The system is over 15 years old: This is the point at which many ACs and furnaces start having problems. Often, the problems are small things like a dead capacitor or control board that can easily be switched out. But small issues are often a harbinger of bigger things to come. If you’ve got a fifteen-year-old system with a bad compressor or a refrigerant leak, replacing it is a no-brainer.
  • You’ve already spent a lot of money on repairs and now there’s another problem: This is the same point at which you would sell your old car as-is and get another one.
  • You’re ready for a more efficient system: Compared to the HVAC system you bought during the Bush administration, today’s options — even at the budget level — are significantly more efficient. In addition to variable speed and two-stage systems, you can get a new AC with a SEER of up to 25! More furnaces also have variable speed blowers and modulating gas valves.
  • The AC uses R-22 refrigerant and has a leak: Ever since the EPA ban on R-22, the old type of freon has gone up in price. Adding R-22 to an old AC is pretty expensive, especially when you consider that an old system is likely to leak again. It’s usually more cost effective to just get a new AC that uses the future-proof R-410A refrigerant.
  • You already need to replace either the AC or the furnace for some reason: When your air conditioner and furnace are the same age, it’s usually more cost-effective to replace both at the same time.

So, yes. There are times when you might want to replace a working furnace and/or AC. And if you’ve decided to do so, there is absolutely a best time of year to do so. Contact us for AC maintenance Bakersfield, CA.

Actually, there are two.

You can replace your HVAC system during any season, but these two are the best.

Fall and spring. Those are the two best times of year to replace your HVAC system.

After that, any time other than what HVAC companies describe as “peak season” is a pretty good time. Here in Bakersfield, the peak seasons for HVAC service are the hottest weeks of summer and the coldest weeks of winter. And of the two, summer is busier by far. That’s just the way it is here in the Southern Central Valley of California.

Why fall and spring? Here are a few reasons:

  • You may be without AC or heat for a few days. That might sound horrible. And in July or January, it is horrible! But in March or October, it’s usually not a big deal to have your HVAC system replaced. Most people do just fine without AC or heat for a few days in the spring or fall.
  • Your HVAC company isn’t very busy. At Holder’s Air Conditioning & Heating, we field the most service calls during peak summer and, to a lesser extent, peak winter. These are the times of year when ACs and furnaces are working the hardest. By the same token, it’s when they tend to break down. If you want to replace your AC in the spring or fall, there’s a good chance we can get you on the schedule right away.

Basically, there are lots of good reasons to replace an HVAC system in October instead of, say… August. The installation can usually happen on your schedule; you save money; and nobody has to suffer from extreme heat or cold during the process.

Aren’t sure your AC is cut out for another summer? Worried your furnace might struggle through the winter?

At Holder’s Air Conditioning & Heating, we can analyze your HVAC system and let you know whether now is a good time to replace it.

If your AC and furnace still have life in them, we’ll let you know.

In many cases, there aren’t any apparent problems that need to be addressed before the AC is tasked with another summer of cooling or the furnace switches on for another winter. But other times, there are. We’ll always engage you in a candid, fully transparent conversation about what is or isn’t going on with your old HVAC system.

If you’re ready to learn more or tell us about the HVAC situation at your Bakersfield area home, call us or send us a message today!

Top Five Reasons Your Heater isn’t Working

Each year between 2012 and 2016, local fire departments in the U.S. responded to an average of 52,025 fires that involved heating equipment. To this day, heating equipment is still one of the leading causes of household fires, accounting for hundreds of civilian deaths every year.

Top Reasons Your Heater Can Stop Working

While modern commercial and residential heating systems are often highly sophisticated and reliable, they are bound to develop problems at some point. When these issues persist, they can threaten not only the comfort of your loved ones but their safety as well.

But what if your heater stopped working altogether in the middle of the winter, leaving your family in the cold? It’s one of the most frustrating experiences you can go through.

The great news is that there are ways to minimize the chances of your heater not kicking on. And if the unexpected does happen, there’s always something you can do to address the problem. In this article, we look at five of the top reasons a heater can stop working, as well as how you can address the situation.

Read on to learn more.

  1. Poor Maintenance Could Be the Reason Your Heater Stopped Working

Perhaps the top reason homeowners call HVAC technicians during the winter is lack of furnace maintenance. If your furnace won’t turn on, it’s almost always because you’ve not had it tuned for a long time. Often, the issue is that the heating system is simply dirty.

If your furnace has a dirty blower, the blower could cause equipment failure. The system’s heat exchanger cannot work unless there’s sufficient air moving across it to stop it from overheating. In short, a dirty blower can cause the heat exchanger to fail.

Dirty air filters could also be the reason your heater stopped working. Such filters restrict the airflow and could even worsen existing issues with wrong duct sizing. That’s why it’s paramount to replace filters every three months or so.

Lack of regular tuning could also result in a dirty flame sensor. That makes it hardly possible to light burners. A sensor covered in a layer of gunk cuts off the moment it turns on because it can’t sense the flame.

Sometimes, it’s the burners themselves that are dirty after a lengthy period of neglect. Such burners do not work well, if at all.

To avoid all these issues, you need to call a seasoned HVAC technician to tune your furnace on a yearly basis. In the long run, regular furnace maintenance is a worthy investment since it protects you from the inconvenience of a broken furnace. And even when the furnace does fail prematurely, you won’t need to worry about replacing costly parts.

  1. Issues with the Thermostat

Another common complaint among homeowners is the thermostat not turning on heat. Usually, the root cause of the problem is that the thermostat is malfunctioning or improperly set.

The function of your HVAC’s thermostat is to regulate the amount of heat that’s generated by your furnace as well as when that heat is generated.  Most thermostats in the market today are quite reliable and will typically give you years of hassle-free service. However, every thermostat will eventually develop problems and require repair or replacement.

Once you discover that your current thermostat has a problem, consider replacing it with a programmable option. A programable thermostat lets you choose different temperatures for various times of the day, night, and week. These thermostats are thus much more energy efficient compared to their non-programmable options.

Sometimes, the problem is that you wrongly programmed the thermostat. It could also be that you inadvertently reprogrammed it at a certain point. Check whether you’ve set the thermostat correctly before calling your local HVAC technician.

  1. The Blower Capacitor Is Dead

If you’ve never seen the blower capacitor of your HVAC, it’s the part of your furnace that has the appearance of a big battery. The capacitor starts the furnace once the setting on your thermostat instructs it to start.

Every capacitor has a tolerance level. In case the tolerance level is lower than a specific level, the blower may not achieve the appropriate RPM.

Sometimes, the capacitor is dying or dead and won’t start the blower. The simple solution is to replace it.

  1. The Refrigerant Levels Are Too Low

If you heat your home using a heat pump, the refrigerant level of the pump can get too low. As a result, the heat strips keep coming on too often, leading to hefty utility bills.

When the refrigerant levels remain too low for a long time, the compressor could overheat and breakdown. That’s why you need to increase the refrigerant charge once you notice that the heat strips are coming on too frequently. It costs much less to recharge your refrigerant or fix leaks than it does to replace the compressor.

  1. Faulty Ductwork Installation or Design

In some cases, the reason your heater isn’t working is not that the heater has a problem. The problem is with the ductwork.

Ensuring that the ductwork is properly designed and installed is a huge undertaking. Many installers, unfortunately, opt to cut corners when sizing ducts or installing them. You might get lucky and end up with ductwork that has been appropriately sized and installed.

But when HVAC installers do a poor job, you’re always going to have issues with airflow throughout your home. The heating system will most likely short cycle frequently. With time, it will overheat and break down completely

So how do you address this situation?

Your best option is to have a competent HVAC technician repair the parts of the furnace that have already failed. Next, the technician needs to redesign the ductwork, so the problem doesn’t recur.

Don’t Let Heater Problems Linger

Heating systems can have a variety of problems, but a furnace that won’t work is arguably the worst. A furnace without power means that your family won’t have heat, which can result in discomfort and illness during the cold season. Once you know the reason your heater stopped working, it becomes easier to know how to address the problem.

If your furnace has been giving you problems, our seasoned technicians can help. Contact us today for a free quote.

When To Heat Up Your House – Tips For Your HVAC System This Winter

Regardless of its size, every heating system needs proper maintenance and care to run smoothly and heat your place during those chilling months accurately. Therefore, exercising careful efforts can save your furnace from technical issues which require a comprehensive expert diagnosis. In addition, neglected HVAC systems remain prone to severe problems and a costly heating repair in Bakersfield. 

Top HVAC tips for this winter season

Mentioned hereunder are some top HVAC tips you can follow this winter season: 

  • Routine Maintenance 

With farsighted and routine preventive maintenance, you can lengthen the life of your heating system while keeping costly repairs at bay. In addition, a timely and advanced tune-up can save you from the need for premature HVAC replacement and repairs.

  • Inspect the Thermostat 

Interlaced or stretched wires and vulnerability to the outside elements can irrevocably degrade your heating system’s thermostat. Therefore, it is better to regularly inspect the thermostat to ensure it remains in an accurate working condition. 

However, before checking the thermostat, always switch off the central power button and give the thermostat wires a little force to assure that they are secured and correctly fitted. Furthermore, look for any visually apparent cracks, leaks, or ruptures. 

  • Oil the Blower Motor

Lubricate the heating system’s motor bearings if your machine employs the kind of motor that requires lubricating. Also, after switching off the power button, unlock the cover, followed by washing the lids covering the HVAC bearings. Eventually, pull the caps to begin lubrication. 

  • Declutter

A filthy heating system consumes more power and energy to function. Therefore, to lower your utility bills and avoid costly repairs, it is better to call experts timely for your HVAC repair in Bakersfield. 

Also, note that a solid collection of dirt and trash can lower the performance of your HVAC machines to suboptimal or, in some cases, even zero. So, without damaging your furnace’s interiors, gently wash the internal parts to loosen stubborn dirt and dust. 

  • Check or Install Carbon Monoxide Detectors 

A carbon monoxide detector should always accompany your heating system as it acts as the fighter against the ‘silent killer’. Also, like the smoke detectors at your, replace the batteries of your carbon monoxide detectors every six months and get the detector tuned up for optimal efficiency. 

  • Keep the HVAC Drainage Tube Clear

Water can dribble out of the heating system into a drip pan via drainage lines in propane-powered and gas heaters. The flame sensor can likewise get damaged by clogged water if the drainage channel gets choked, eventually shutting down the heating system. 

Also, any unclear build-up in the pipe can be controlled or removed by running a cup of white vinegar into it. You can likewise employ compressed air to unclog the HVAC drain tube of waste by separating the drain line from the manifold.

Reaching out for expert help and consultation on your heating system is a guaranteed measure to keep your machine running accurately. Also, for affordable and reliable maintenance or heating repair in Bakersfield, head straight to Holders Air Conditioning & Heating. For more details, call us at (661)8641925 or drop us an email at support@holdersac.com.